Ethernet (Mac)- And Ip Address - Bosch Rexroth Rho 4.0 Connectivity Manual

1070072365 / 04 RhoMotion
Interface Ports & Connectors
5.5.1

Ethernet (MAC)- and IP address

Ethernet Address
The metallic housing of the 100BaseT socket is set above the front shield
on the control housing resp. the shield. The cable shield is set above the
connector housing on the socket shield.
Ethernet RJ45
1
8
The line should have:
D a cross section of 0.08 mm@ to 0.34 mm@
D 100-Ω-impedance
D 12 to 45 twists per meter
Special cables for this use can be obtained under the following designa-
tion:
D STP cable, category 5 (STP = Shielded Twisted Pair)
D STP cable, category 6 (increasing category number means better ca-
ble properties)
. We recommend to use STP cables of category 5.
The rho4.0 has a fixed set ethernet address. This address is allocated
once in the world.
The ethernet address consists of 6 address bytes and has the following
structure:
Fixed part
0xXX
The address is entered in HEX.
Electric Drives
and Controls
Ethernet
max. 100 m
8
Free
Free 7
6
RXD−
5
Free
4
Free
3
RXD+
TXD− 2
1
TXD +
0xXX 0xXX
Bosch Rexroth AG
To the network
Components specific
Xx yy
5−11
zz