Bosch Rexroth Rho 4.0 Connectivity Manual page 12

1−2 Bosch Rexroth AG
Safety Instructions
1.2 Qualified personnel
Electric Drives
and Controls
The requirements as to qualified personnel depend on the qualification
profiles described by ZVEI (central association of the electrical industry)
and VDMA (association of German machine and plant builders) in:
Weiterbildung in der Automatisierungstechnik
edited by: ZVEI and VDMA
MaschinenbauVerlag
Postfach 71 08 64
D-60498 Frankfurt.
The present manual is designed for RC technicans. They need special
knowledge on handling and programming robots.
Interventions in the hardware and software of our products, unless de-
scribed otherwise in this manual, are reserved to specialized Rexroth
personnel.
Tampering with the hardware or software, ignoring warning signs at-
tached to the components, or non-compliance with the warning notes
given in this manual may result in serious bodily injury or damage to pro-
perty.
Only electrotechnicians as recognized under IEV 826-09-01 (modified)
who are familiar with the contents of this manual may install and service
the products described.
Such personnel are
D those who, being well trained and experienced in their field and famil-
iar with the relevant norms, are able to analyze the jobs being carried
out and recognize any hazards which may have arisen.
D those who have acquired the same amount of expert knowledge
through years of experience that would normally be acquired through
formal technical training.
With regard to the foregoing, please note our comprehensive range of
training courses. Please visit our website at
http://www.boschrexroth.com
for the latest information concerning training courses, teachware and
training systems. Personal information is available from our Didactic
Center Erbach,
Telephone: (+49) (0) 60 62 78-600.
RhoMotion 1070072365 / 04