Bosch Rexroth Rho 4.0 Connectivity Manual page 15

Hide thumbs Also See for Rexroth Rho 4.0:
Table of Contents

Advertisement

1070072365 / 04
RhoMotion
Safety Instructions
1.5
Safety instructions for the described product
DANGER
Danger of life through inadequate EMERGENCY-STOP devices!
EMERGENCY-STOP devices must be active and within reach in all
system modes. Releasing an EMERGENCY-STOP device must not
result in an uncontrolled restart of the system!
First check the EMERGENCY-STOP circuit, then switch the sys-
tem on!
DANGER
Danger for persons and equipment!
Test every new program before starting up a system!
DANGER
Retrofits or modifications may adversely affect the safety of the
products described!
The consequences may include severe injury, damage to equip-
ment, or environmental hazards. Possible retrofits or modifica-
tions to the system using third-party equipment therefore have to
be approved by Rexroth.
DANGER
Do not look directly into the LEDs in the optical fiber connection.
Due to their high output, this may result in eye injuries.
When the inverter is switched on, do not look into the LED or the
open end of a short connected lead.
DANGEROUS ELECTRICAL VOLTAGE
Unless described otherwise, maintenance works must be per-
formed on inactive systems! The system must be protected
against unauthorized or accidental reclosing.
Measuring or test activities on the live system are reserved to
qualified electrical personnel!
Electric Drives
Bosch Rexroth AG
and Controls
1−5

Advertisement

Table of Contents
loading

Table of Contents