Standards Compatibility - Bosch Rexroth Rho 4.0 Connectivity Manual

2−8 Bosch Rexroth AG
System Overview
Humidity
Air pressure
Protection type
Resistance to vibrations in operation
Resistance to thermal shocks
2.5

Standards compatibility

Electric Drives
and Controls
Humidity class RH-2 acc. to DIN EN 61131-2, thawing not authorized.
In operation up to 2000 m above mean sea level acc. to
IP20 acc. to DIN VDE 0470-1, installed in the housing
For the rho4.0, dust-free air is required. Housing and installation frames
in which the rho4.0 is installed, must satisfy the minimum protection type
IP 54 acc. to DIN VDE 0470-1.
Frequency range:
Deviation:
Acceleration
acc. to DIN
61131-2:
15 g acc. to DIN 61131-2, no disturbance of the function
The rho4.0 conforms to the following standards:
D VDE 0470-1
D EN 50 081−2
D EN 60 204−1
D EN 50 082−2
D EN 60 742
D EN 60 950
D EN 61 131
D EN 61 131−2
D EN 60 529
D EN 60 068−2−6
D EN 60 068−2−27
RhoMotion
10 to 57 Hz
0,075 mm at 10 to 57 Hz
1 g at 57 to 150 Hz
Protection type
Basic specification for interference emission
(industrial environment)
Electrical systems on machines
Basic technical standard, interference resistance
(industrial environment)
Tranformer for 24 V power supply, protective
separation
Overvoltage category II
Requirements w/ respect to 24 V outputs
Requirements w/ respect to 24 V power supply
Protection categories (incl. housings and
installation compartments)
Vibration test
Impact test
1070072365 / 04
DIN EN 61131-2