Specifications - Bosch Rexroth Rho 4.0 Connectivity Manual

2−6 Bosch Rexroth AG
System Overview
2.3

Specifications

Electric Drives
and Controls
Technical data
housing
location
Pentium-Prozessor
with Intel MMXT Technologie
Second Level Cache
DRAM
SRAM
Harddisk
V24_1/X31
V24_2/X32
EMV-steadiness
power consumption from 24V
current consumption from 24V
Buffer
CAN-interfaces
LAN-interface
16 digital inputs
8 digital outputs
Status-LEDs
V24_3/X33 (V24/20 mA-interface)
Sercos-interface
Floppy-interface
PHG-interface
RhoMotion 1070072365 / 04
Design as drive module or 19" mo-
dule
44 mm high, aerated
D vertically near a drive module
D horizontally in the 19" cabinet
266-, resp. 400-MHz Pentium with
MMX
512 K L2 Cache
64 MB DIMM- SOII
max. 4MB SRAM buffered
(central through battery)
64 MB IDE Compact-Flash card
(can be internally plugged)
ESD solid up to 15 KV
meets all requirements set, see
chapter 1.1
approx. 48 W
approx. 2 A
centrally buffered through battery
Battery monitoring
Battery change every 3 years
2 or 3 (only rho4.0 L)
10/100 Mbit, RJ45 (Twisted Pair)
.
Cables of class 5 at least
must be used
X21, X22, 8-pin
3,5 mm Weidmüller terminal strip
X11, 8-pin
3,5 mm Weidmüller terminal strip
8, to display the most important
operations states
9-pol. D-SUB, not separated galva-
nically
In/Out
25-pin D-Sub for external floppy
14-pin safety terminal
25-pin D-Sub für PHG2000 con-
nection