Table of Contents
Advertisement
2
Installation
8
2.2
Setting Up
i
Note!
For adjustments and simple installation work, use the accompanying Allen key located in the top section of
the print unit. No other tools are required for the work described here.
i
Note!
Please keep the original packaging in case the printer must be returned.
!
Attention!
The device and printing materials will be damaged by moisture and wetness.
Set up label printers only in dry locations protected from splash water.
Lift the labelling system out of the box.
Check the labelling system for damage which may have occurred during transport.
Remove foam transportation safeguards near the printhead.
Check delivery for completeness.
Contents of delivery:
•
Labelling system consisting of label printer and tube applicator
•
Tray (optional)
•
Power cable (for AC devices only)
•
USB cable
•
Instructions
•
DVD with label software, Windows driver and documentation
Set up the labelling system on a level surface.
Push the tray (1) under the applicator and fit it at the axle (2).
Figure 5
Fitting the tray
1
2
8
Advertisement
Table of Contents
