Table of Contents
Advertisement
5
Operation
18
!
Attention!
Printhead damage caused by improper handling!
Do not touch the underside of the printhead with the fingers or sharp objects.
Ensure that the labels are clean.
Ensure that the label surfaces are smooth. Rough labels act like emery paper and reduce the service life
of the printhead.
Print with the lowest possible printhead temperature.
The labelling system is ready for operation when all connections have been made and labels and the transfer ribbon
have been loaded.
5.1
Synchronization of the Paper Feed
After the label stock has been inserted a synchronization of the paper feed is required. That way the first label, which
is detected by the label sensor, will be transported to the print position and all labels in front will be fed out of the
printer. So the synchronization avoids, that blank labels are peeled-off together with the first printed label. That can
cause useless first labels.
Fold down the applicator.
Select
Remove the blank labels peeled-off during the synchronization.
Fold up the applicator.
i
Note!
Synchronization is not necessary if the printhead was not opened between different print jobs, even if the
labelling system was switched off.
to start the synchronization.
18
Advertisement
Table of Contents
