Loading Media; Positioning The Media Roll On The Roll Retainer - CAB AXON 2 Original Instructions Manual

4 Loading Material
14
4.2

Loading Media

4.2.1

Positioning the Media Roll on the Roll Retainer

5
Figure 12
1. Open cover.
2. Fold down the applicator (5)
3. Turn the ring (2) at the margin stop (1) counterclockwise, so that the arrow points to the symbol
release the margin stop.
4. Remove the margin stop (1) from the roll retainer (4).
5. Load label the roll (3) on the roll retainer in such a way that the printing side of the labels is visible from above.
6. Re-mount the margin stop (1) onto the roll retainer (4). Push the margin stop (1) to the roll (3) until the roll touches
both margin stops and a clear resistance is encountered.
7. Turn ring (2) clockwise, so that the arrow points to the symbol
retainer (4).
8. Supply a longer label strip of approx. 60 cm.
Loading media
, and thus fix the margin stop (1) on the roll
14
1
2
3
4
, and thus