IBM Power Systems 8001-12C Manual page 74

Table 19. Sensor information, event description, and service action for the 8001-22C and 8005-22N (continued)
Sensor name (Sensor ID)
v CPU Core Func 13 (0xD4)
v CPU Core Func 14 (0xD5)
v CPU Core Func 15 (0xD6)
v CPU Core Func 16 (0xD7)
v CPU Core Func 17 (0xD8)
v CPU Core Func 18 (0xD9)
v CPU Core Func 19 (0xDA)
v CPU Core Func 20 (0xDB)
v CPU Core Func 21 (0xDC)
v CPU Core Func 22 (0xDD)
v CPU Core Func 23 (0xDE)
v CPU Core Func 24 (0xDF)
Chassis Intru (0xE2)
58
Problem analysis, system parts, and locations for the 8001-12C, 8001-22C, 8005-12N, and 8005-22N
Event description
v IERR
v Transition to Non-recoverable
v Predictive Failure
v FRB1 BIST Failure
v FRB2 Hang In POST Failure
v FRB3 Processor Startup
Initialization Failure
v Configuration Error
v SMBIOS Uncorrectable CPU
Complex Error
v Processor Disabled
v Terminator Presence Detected
v Machine Check Exception
v Correctable Machine Check Error
v State Deasserted
v Device Disabled
v Transition to Critical from Less
Severe
v Transition to Non-recoverable from
Less Severe
v Transition to Critical from
Non-recoverable
v Thermal Trip
v Processor Automatically Throttled
v Processor Presence Detected
v State Asserted
v Device Enabled
v Transition to OK
v Transition to Non-Critical from OK
v Transition to Non-Critical from
More Severe
v Monitor
v Informational
v Drive Bay intrusion
v I/O Card area intrusion
v Processor area intrusion
v System unplugged from LAN
v Unauthorized dock
v FAN area intrusion
General Chassis intrusion
Service action
Replace system processor CPU 2. Go
to "8001-22C or 8005-22N locations"
on page 87 to identify the physical
location and removal and
replacement procedure.
No service action is required.
No service action is required.
Ensure that the top cover is properly
installed on the system. See Installing
the service access cover on an
8001-22C or 8005-22N system.