IBM Power Systems 8001-12C Manual page 56

Table 18. Sensor information, event description, and service action for the 8001-12C and 8005-12N (continued)
Sensor name (Sensor ID)
v CPU Core Func 1 (0xC8)
v CPU Core Func 2 (0xC9)
v CPU Core Func 3 (0xCA)
v CPU Core Func 4 (0xCB)
v CPU Core Func 5 (0xCC)
v CPU Core Func 6 (0xCD)
v CPU Core Func 7 (0xCE)
v CPU Core Func 8 (0xCF)
v CPU Core Func 9 (0xD0)
v CPU Core Func 10 (0xD1)
v CPU Core Func 11 (0xD2)
v CPU Core Func 12 (0xD3)
40
Problem analysis, system parts, and locations for the 8001-12C, 8001-22C, 8005-12N, and 8005-22N
Event description
v IERR
v Transition to Non-recoverable
v Predictive Failure
v FRB1 BIST Failure
v FRB2 Hang In POST Failure
v FRB3 Processor Startup
Initialization Failure
v Configuration Error
v SMBIOS Uncorrectable CPU
Complex Error
v Processor Disabled
v Terminator Presence Detected
v Machine Check Exception
v Correctable Machine Check Error
v State Deasserted
v Device Disabled
v Transition to Critical from Less
Severe
v Transition to Non-recoverable from
Less Severe
v Transition to Critical from
Non-recoverable
v Thermal Trip
v Processor Automatically Throttled
v Processor Presence Detected
v State Asserted
v Device Enabled
v Transition to OK
v Transition to Non-Critical from OK
v Transition to Non-Critical from
More Severe
v Monitor
v Informational
Service action
Replace system processor CPU 1. Go
to "8001-12C or 8005-12N locations"
on page 73 to identify the physical
location and removal and
replacement procedure.
No service action is required.