IBM Power Systems 8001-12C Manual page 104

Table 37. Front view locations (continued)
Index number
7
8
9
10
11
12
*For more information about the placement of HDD and NVMe FRUs in 8001-22C systems, see Drive
installation information for the 8001-22C system.
*8005-22N systems do not support hard disk drives in this location. 8005-22N systems do not support
NVMe drives.
88
Problem analysis, system parts, and locations for the 8001-12C, 8001-22C, 8005-12N, and 8005-22N
FRU description
HDD 6
HDD 7
HDD 8 or NVMe 0*
HDD 9 or NVMe 1*
HDD 10 or NVMe 2*
HDD 11 or NVMe 3*
FRU removal and replacement
procedures
See Removing and replacing a
storage drive in the 8001-22C or
8005-22N.
See Removing and replacing a
storage drive in the 8001-22C or
8005-22N.
See Removing and replacing a
storage drive in the 8001-22C or
8005-22N.
See Removing and replacing a
storage drive in the 8001-22C or
8005-22N.
See Removing and replacing a
storage drive in the 8001-22C or
8005-22N.
See Removing and replacing a
storage drive in the 8001-22C or
8005-22N.