IBM Power Systems 8001-12C Manual page 106

Table 38. Top view locations (continued)
Index number
21
22
23
Figure 11. Rear view
Table 39. Rear view locations
Index number
22
23
24
25
26
27
90
Problem analysis, system parts, and locations for the 8001-12C, 8001-22C, 8005-12N, and 8005-22N
FRU description
System backplane
PSU 1
PSU 2
FRU description
PSU 1
PSU 2
PCIe adapter 2 (UIO Slot2)
Note: This location is reserved for
the super capacitor card when a host
bus adapter is present.
PCIe adapter 1 (UIO Network)
PCIe adapter 3 or GPU 1 (UIO Slot1)
PCIe adapter 4 (PLX Slot1)
FRU removal and replacement
procedures
See Removing and replacing the
system backplane in the 8001-22C or
8005-22N.
See Removing and replacing a power
supply in the 8001-12C, 8001-22C,
8005-12N, or 8005-22N.
See Removing and replacing a power
supply in the 8001-12C, 8001-22C,
8005-12N, or 8005-22N.
FRU removal and replacement
procedures
See Removing and replacing a power
supply in the 8001-12C, 8001-22C,
8005-12N, or 8005-22N.
See Removing and replacing a power
supply in the 8001-12C, 8001-22C,
8005-12N, or 8005-22N.
See Removing and replacing PCIe
adapters in the 8001-22C or
8005-22N.
See Removing and replacing PCIe
adapters in the 8001-22C or
8005-22N.
For PCIe adapters, see Removing and
replacing PCIe adapters in the
8001-22C or 8005-22N. For the
graphics processing unit, see
Removing and replacing a graphics
processing unit in the 8001-22C.
Note: 8005-22N systems do not
support GPUs.
See Removing and replacing PCIe
adapters in the 8001-22C or
8005-22N.