Menue Mode / Operating Menue - Labom CI4 Series Operating Instructions Manual

For all further values, you can additionally choose from the following data:
− Sensor temperature
− ATC temperature (for devices including the ATC option)
− Density
− Device ID (see 6.5.10.1)
− HART tag
− HART descriptor
When information (such as the device ID) cannot be displayed in a short layout placehold-
er, "###" appears on the screen. Then select another layout or assign the value to a longer
layout placeholder.
You can configure the display mode in the operating menue (see 6.5.5.2).
6.4

Menue Mode / Operating Menue

Press OK in the measured value display to go to the operating menue. Then the main
menue appears in the display.
In the operating menue you can navigate in the menues by using the arrow buttons. The
selected menue item is indicated by triangles on the left and right. The OK button selects
the menue item or switches to the corresponding submenue. You can return to the higher-
level menue by pressing ESC. From the main menue, pressing ESC returns to the meas-
ured value display.
From every position in the operating menue, you can return to the measured value display
by pressing and holding the ESC button (for at least one second).
ESC long
In long menues and selection lists, a scroll bar on the left side shows the position of the
currently selected item.
Menue items that open a setting dialogue differ from submenues by three trailing points,
e.g. "Lower range ..." (setting dialogue) and "System" (submenue).
If no button is pressed in menue mode for five minutes, the device automatically returns to
the display mode without saving any values.
BA_078 Rev 1F6 Level transmitter PASCAL Ci4 LEVEL
OK
ESC
ESC
Figure 14: The Operating menue
OK
ESC
Page 15/36