Labom CI4 Series Operating Instructions Manual page 16

Button Function
Scroll up in the menue, increase value/position in list
Scroll down in the menue, decrease value/position in list
OK Select menue, confirm value/list entry
ESC Cancel the data entry or menue selection, return to the next higher
menue
ESC long Cancel menue mode, return to display mode
6.4.1 Displaying and entering parameters
When entering parameters, either numerical inputs or a selection lists with fixed options is
available.
In general, the actual selection will be displayed first (view mode). Press OK to switch to
edit mode to change the parameter. After this is done, the display will then switch back to
view mode so that you can check the new setting.
6.4.1.1 Selection of a value from a selection list
Up to three options are shown at the same time in one selection list. When the selection
list is longer, a scroll bar on the left side of the display indicates the position of the selected
item in the selection list.
When you press the ESC button, you cancel the entry and go back to view mode. The se-
lected value is not saved.
With the OK button, the selected value is saved. Saving the value is confirmed with an in-
formation window and the new value is shown in view mode.
With ESC, you leave the view mode and return to the menue.
menue
Figure 15: Procedure for value selection (e.g. changing language from english to german)
BA_078 Rev 1F6 Level transmitter PASCAL Ci4 LEVEL
Table 5: Button functions in the operating menue
view mode
OK
ESC
ESC
edit mode
OK
ESC
ESC
OK
Page 16/36