Labom CG201x series Operating Instructions

Labom CG201x series Operating Instructions

Submersible pressure transmitter

Advertisement

Quick Links

Submersible pressure transmitter
for hydrostatic level measurement, Type series CG201x
Operating Instructions
1 General Information....................................................................................................... 2
1.1 General Safety Notes .............................................................................................. 2
1.2 Intended Use ........................................................................................................... 2
1.3 Conformity with EU Regulations .............................................................................. 2
1.4 ATEX Approval ........................................................................................................ 2
2 Transportation and Storage .......................................................................................... 2
3 Installation and Commissioning .................................................................................. 2
3.1 Mechanical Installation ............................................................................................ 2
3.2 Electrical Connection .............................................................................................. 3
4 Operation ........................................................................................................................ 3
4.1 Maintenance / Service ............................................................................................. 3
5 Disassembly ................................................................................................................... 3
Questions about this device? Hotline +49 (0) 4408 804 - 444
LABOM Mess- und Regeltechnik GmbH Im Gewerbepark 13 27798 Hude Deutschland
Tel.: +49 (0) 4408 804-0 Fax: +49 (0) 4408 804-100 e-mail: info@labom.com www.labom.com
BA_048
Rev 1K7
Page 1/3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CG201x series and is the answer not in the manual?

Questions and answers

Summary of Contents for Labom CG201x series

  • Page 1 BA_048 Questions about this device? Hotline +49 (0) 4408 804 - 444 Rev 1K7 LABOM Mess- und Regeltechnik GmbH Im Gewerbepark 13 27798 Hude Deutschland Page 1/3 Tel.: +49 (0) 4408 804-0 Fax: +49 (0) 4408 804-100 e-mail: info@labom.com www.labom.com...
  • Page 2 In addition to this instruction, be sure to observe all statutory requirements, appli- cable standards, the additional technical specifications on the accompanying data sheet (see www.labom.com) as well as the specifications indicated on the type plate. General Safety Notes The installation, set up, service or disassembly of this device must only be done by trained, qualified personnel using suitable equipment and authorized to do so.
  • Page 3 Check that the screwed cable gland for the electrical connection is fixed tightly in place before immersing the transmitter. Submersible transmitters are ventilated via the connecting cable. Make sure that the con- nection room for the cable is dry and ventilated. In order to guarantee a safe ventilation you must make sure that the cable to the submersible transmitter is not buckled or dam- aged at any point.

Table of Contents