Change Codes - Pyronix Enforcer 32-WE Programming Reference Manual

5.8 Change Codes?

All codes may be 4, 5, or 6 digits long and can also be assigned as proximity tags and keyfobs. 75
user codes are available
NOTES: Only 'Duress/Guard', 'Master Manager' and 'Engineer codes' can be changed by the engineer.
User codes can only be changed by the Master Manager from the Master Manager menu. The Master
User and Engineer Codes cannot be deleted.
User Arm and Disarm System. Also for Access Control and Sub Area
Control functions
Manager Arm and Disarm System. Also access to Manager menu
Default: 1234 functions
Engineer Access to all engineering functions; also arm/disarm system for
test purposes.
Duress Disarm system, generating silent 'Duress' signal.
Guard Disarm system, but only after an alarm has been active for a
minimum time (programmable). Also arm system. An output
type is available to activate whenever this code is used.
5.8.1 Change Duress/Guard Codes?
Choose Code Number
If a code or tag is already allocated, the display will show [******]. Press  to clear the code.
Choose Code Number  User Type
The user type can be Duress or Guard.
Duress Code
The Duress code can arm or disarm the system and if used, a Duress communication event will be
sent. An output type is available to activate whenever this code is used (Duress type 008 - see
page 31 Program Outputs).
User In Area
Choose the area the code is active in – A,B,C,and D.
User In Area  User Arm Options
[0] Disarm/Arm: The code will arm and disarm the areas selected in the previous option.
[1] Disarm Only: The code will only disarm the areas selected in the previous option.
[2] Arm Only: The code will only arm the areas selected in the previous option.
[3] None: No option programmed.
User In Area  User Arm Options  Arm Area Choice
If a user code is allocated to more than one area and the Arm Area Choice option is set to NO, the
code will automatically arm all areas it has been allocated to when the code is entered to arm. If
the Arm Area Choice has been set to YES then the user will be given the ability to choose which
area to arm when the arming procedure has been activated.
User In Area  User Arm Options  Arm Area Choice  User Name
Write the name of the user for this code.
Guard Code
This code can disarm the system, but only after an alarm has been active for a minimum time
programmable in the timers. Use of this code will generate a normal user arm/disarm event. An
output type is available to signal whenever this code is used.
User In Area
Choose the area the code is active in – A,C,B,and D.
User In Area  User Arm Options
[0] Disarm/Arm: The code will arm and disarm the areas selected in the previous option.
[1] Disarm Only: The code will only disarm the areas selected in the previous option.
[2] Arm Only: The code will only arm the areas selected in the previous option.
[3] None: No option programmed.
Page: 19
Programmed by Manager
only.
Programmed by Manager
or Engineer.
Programmed by Engineer.
Programmed by Engineer.
Programmed by Engineer.