Power Functions; Auto-Power Off; Battery Charge Modes - Epson TM-P60II Technical Reference Manual

Power Functions

You can customize the printer using the power functions, the auto-power off function and battery charge mode
function to save the battery power or minimize the battery deterioration.

Auto-Power Off

The printer turns off the power automatically after the specified amount of time elapses in the power saving sta-
tus.
The initial setting of the auto-power off function differs depending on the models as follows:
For European models: Enabled (The auto-power off time is set to 60.)
For North America models: Disabled (The auto-power off time is set to 0.)
 The auto-power off time is selectable with the customized value. To set the customized value,
 To disable this function, set the auto-power off time to 0.
 When using a USB, even if the set time is defined, the auto-power off function is disabled.

Battery Charge Modes

The printer acts differently when connected to the AC adapter depending on the battery charge mode.
The printer has two modes and is initially set to the mode 1.
The battery charge mode is selectable with the customized value. To set the customized value,
see
Mode 1
In the mode 1, the printer charges the battery even if the battery is fully charged.
Mode 2
In the mode 2, the printer charges the battery when the remaining battery charge is less than fully charged.
20
see "Software Settings" on page
"Software Settings" on page 48.
48.