Power Functions; Auto-Power Off; Battery Charge Modes - Epson TM-P80 Technical Reference Manual

Power Functions

You can customize the printer using the power functions, the auto-power off function and battery charge mode
function to save the battery power or minimize the battery deterioration.

Auto-Power Off

The printer automatically turns off once the specified time has elapsed in the idle state.
However, when the printer is in the following status, it is not considered as idle state, and the auto-power off
function is not applied.
• Printer is off-line
• Remaining battery amount is at S level
The auto-power off time is selectable with the customized value. To set the customized value, see
"Software Settings" on page

Battery Charge Modes

The printer acts differently when connected to the AC adapter depending on the battery charge mode.
The printer has two modes and is initially set to the mode 1.
The battery charge mode is selectable with the customized value. To set the customized value,
see
Mode 1
Suitable for battery-powered operation.
In Mode 1, battery charging is controlled so that the battery is always fully charged. This maximizes the battery
life when using the printer as a portable printer.
Mode 2
Suitable for the printer that is always connected to the AC adapter.
In Mode 2, battery charging is controlled so that the battery is about 80% charged. This reduces the deteriora-
tion of the battery.
49.
"Software Settings" on page 49.
Chapter 1 Product Overview
21
1