Epson TM-P60II Technical Reference Manual page 49

User NV memory capacity
 1 KB (initial setting)
 64 KB
 128 KB
 192 KB
NV graphics memory capacity
 None
 64 KB
 128 KB
 192 KB
 256 KB
 320 KB
 384 KB (initial setting)
Print density
Selectable from 70% to 130% (initial setting: 100%)
Depending on the paper type, it is recommended to set the print density as shown in the table below for the best
print quality.
Roll Paper Type
Die-cut label
Receipt paper
 If the print density is set to a darker level, printing speed may be reduced.
 If the print density is set to a darker level, paper dust accumulates on the print head and print
may be faint. For information about how to clean the thermal head, see
Head" on page
Print speed
Selectable from levels 1 to 10 (Slow ~ Fast) (initial setting: level 10)
 The printing speed changes automatically depending on power supply voltage and the condi-
tion of the head temperature.
 Printing speed may be slower, depending on the data transmission speed and the combina-
tion of control commands.
Original Paper Type
DTM9502
P31023, P35024
P30023
79.
Chapter 3 Advanced Usage
Density Level
130%
100%
110%
"Cleaning the Thermal
3
49