Page 1
iOS Bluetooth Model Technical Reference Guide Connecting to iOS Devices Describes how to connect iOS devices. Application Development Information Describes the development and distribution of iOS application. Notes on Usage Describes the precautions on using this printer and iOS devices. Transmission Specifications Describes the specifications on transmission.
Page 2
Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third par- ties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and maintenance...
Never disassemble or modify this product or the installed Radio Frequency module. Seiko Epson Corporation shall not be liable for interference to radio/TV resulting from changes or modifica- tions to this product or the installed Radio Frequency module not expressly approved by Seiko Epson Corpo-...
TM-P60II Bluetooth interface models, and iOS Bluetooth models. When this manual contains the same items as the manuals for the TM-P80 Bluetooth interface models or the TM-P60II Bluetooth interface models, priority is given to the contents of this manual.
Contents ■ Restriction of Use ........................3 ■ Note about interference ......................3 ■ About this Manual ........................4 Aim of the Manual ................................4 Manual Content .................................. 4 ■ Contents............................5 Connecting to iOS Devices................7 ■ Supported Operating Systems and Devices ..............7 Supported OS ..................................7 Supported devices................................
Connecting from iOS Devices Follow the steps below to establish a Bluetooth connection from an iOS device. On the "Settings" screen, tap [Bluetooth]. Turn on the printer, and then on the iOS device, set Bluetooth to [On]. The printer is displayed in the list of devices. If the printer is connected to another computer, smart device, and so on, it may not be displayed in the list of devices.
Page 9
Chapter 1 Connecting to iOS Devices Tap the printer you want to use from the list of devices. Check that the printer is connected to the iOS device.
Auto Reconnect What is the Auto Reconnect Feature? The auto reconnect feature allows the printer to automatically restore a connection if the Bluetooth connection to the iOS device is lost. When this feature is enabled, in the following situations the printer automatically reconnects to the iOS device to which it was last connected.
<To disable> Press the Feed button twice. When the following printer firmware versions are being used: TM-P60II (5.12 ESC/POS or later), TM-P60II Peeler (6.12 ESC/POS or later), TM-P80 (1.01 ESC/POS or later) Press the Feed button again. (Keep pressing the button until the printer starts print- ing.)
Changing the settings is complete. You can turn off the printer. When the following printer firmware versions are being used: TM-P60II (5.11 ESC/POS or earlier), TM-P60II Peeler (6.11 ESC/POS or earlier), TM-P80 (1.00 ESC/POS or earlier) Press the Feed button again. (Keep pressing the button until the following message is printed.)
Epson. Epson will provide Apple with the information on the application. Once Apple has given their approval, Epson will send the Application Submitting Guide to you (the developer). Follow the steps in the Application Submitting Guide to register the application to...
Solution Do not send data to the printer if the printer is not ready to print. For developers using the SDK from Epson, see the User's Manual - Chapter 3 Programming Guide - "Printing After Checking the Printer Status". Since Bluetooth is disconnected when this occurs, if the auto reconnect feature is not enabled, you need to reconnect from the Bluetooth settings screen on the iOS device.
When data is sent to the iOS device before it switches to power-saving mode (less than approx. 30 seconds) after the printer has received data from the iOS device When using the SDK from Epson (however, this may occur when receiving data from a printer using a com- mand transmission/reception API)
SDK Release 14.06.30E or later pack- iPad mini age. iPod touch (5th generation) This problem does not occur in the TM-P80. iPhone 4s This situation can be avoided by using the ePOS-Print SDK for iOS which is included in the ePOS-Print SDK iPhone 4 Release 14.06.30E or later package.
Chapter 4 Transmission Specifications Transmission Specifications Conforms to Bluetooth Specification Version 2.1 + EDR Built-in Serial Port Profile (SPP) Built-in iAP protocol Bluetooth Power Class 2 specifications Built-in antenna...