Product Configurations
Interfaces
Wi-Fi (IEEE802.11a/b/g/n) + USB interface model
Bluetooth (Ver. 2.1 + EDR) + USB interface model
NFC Tag
You can perform wireless setup for terminals that support NFC by placing the terminal close to the NFC tag
(mark) on the printer.
*There is no Read/Write function.
Buzzer
Model with the internal buzzer function.
Accessories
Included
Thermal roll paper (for operation check)
Battery pack (OT-BY60II)
AC adapter (PS-11)
AC cable
*1
Wire saddle
USB cable
Setup Guide (Wi-Fi / Bluetooth)
User's manual
Warranty certificate
*1 May not be included, depending on the model.
*1
*1
Chapter 1 Product Overview
NFC Tag
1
13