Printing and Cutting Positions
Manual cutter
Peeling position
Platen head
Approx. 15 mm
Numeric values used here are typical values. The values above may vary slightly as a result of
paper slack or variations in the paper. Take this into account when setting the manual cutting
position.
When a peeler is used: Label
When a label is issued continuously: Liner + Label or receipt
Label peeler sensor
Peeler shaft
Peeler roller
When a peeler is used: Liner
When a label is issued continuously: Nothing
is fed
Platen
Reflecting photosensor
Transmissive photosensor
Appendix
95