Epson TM-P60II Technical Reference Manual page 83

Roll paper Width
Original paper type
Roll diameter
LEDs Error LED
Battery LED
Dip switches
Memory switches
Offline response
(See "Software Settings" on page
Battery status levels
(See "Software Settings" on page
Interface Serial
USB
Bluetooth
(Factory option)
Wi-Fi
(Factory option)
Wi-Fi default mode
Wi-Fi security
ePOS-Print
Startup time
ESC/POS commands
Drivers APD
OPOS ADK
OPOS ADK for .NET
JavaPOS ADK
(Windows)
JavaPOS ADK
(Linux)
Power supply unit
TM-P60
29.5 mm, 36 mm, 42 mm, 48.5 mm, 55 mm, 58 mm, 60 mm
TF50KS-E, P300, P310, P350, ETLA
series
Red LED
Red LED
Dip switches 1-2, 1-3, 1-4 assigned
for serial interface settings
Memory switches 8-1~ 8-8
Offline response excluding offline
48.) cause
4 levels
48.)
RS-232
Not available
Ver. 1.1
802.11b (2.4 GHz)
Ad-hoc
WEP
Not available
Approx. 2 sec.
You can control a TM-P60II with the ESC/POS commands that you used for
a TM-P60.
Available
Available
Available
Available
Available
PS-10
Chapter 6 Replacement of the TM-P60
TM-P60II
TF50KS-E, P30023, P31023, P35024,
V9NS5, DTM9502
Up to 51 mm
Orange LED
3 Blue LEDs
Dip switches are not available.
Same as the TM-P60 except Mem-
ory switches 8-3, 8-6, and 8-7.
Offline response including offline
cause
6 levels
Not available
USB 2.0
Ver. 2.1 (EDR supported)
802.11b/g/n (2.4GHz)
802.11a/n (5GHz)
Infrastructure
WEP, WPA, WPA2-Personal/Enter-
prise
Available with the Wi-Fi models
Wi-Fi models: Approx. 10 sec.
Bluetooth models: Approx. 2 sec.
Available
Available
Available
Available
Not available
PS-11
6
83