Epson TM-P60II Technical Reference Manual page 71

 [Roaming] and [AP Density] in the [Wireless] menu can be set only when the Wi-Fi model's
firmware is version 1.17 or later.
 [Wellknown Community Name] in the [SNMP] menu can be set only when the Wi-Fi model's
firmware is version 1.19 or later.
The initial value is enabled.
If you disable this setting, there are the following restrictions.
 TM drivers
The battery status cannot be acquired.
Port opening is extended by approximately 2 seconds.
 Deployment Tool
The model name cannot be acquired.
 EpsonNet Config/Monitoring Tool
The model name, status, and setting information cannot be acquired.
The setting cannot be changed.
 You can also select the following functions from the optional configuration menu.
 Administrator Information: Use to register administrator name and the printer location.
 Reset: Use to reset the interface card or restore the default settings.
 Password: Use to change the password.
Chapter 3 Advanced Usage
71
3