Bluetooth Wireless Interface - Epson TM-P60II Technical Reference Manual

Bluetooth Wireless Interface

Countries where Bluetooth can be used are limited. Since notes are provided for each country,
check the sheet supplied with the product.
Specification
 Bluetooth 2.1 (EDR supported)
 Bluetooth Power Class 2
 Built-in antenna
 Pass key setting is possible
 Device name setting is possible
Initial Bluetooth Settings
Setting Contents
Bluetooth communication
settings
1: iOS Bluetooth model only
2: Only when the firmware version is 6.14 ESC/POS or later. (iOS Bluetooth model only)
Auto Reconnect Feature (iOS Bluetooth model)
The auto reconnect feature allows the printer to automatically restore a connection in the following situations if
the Bluetooth connection to the iOS device is lost.
 When the printer is turned on
 When the signal is dropped and then restored
The following shows the printer operations and connection methods when the auto reconnect feature is enabled
or disabled.
104
Setting Items
Bluetooth passkey
Bluetooth device name
Bundle Seed ID*
Enable/Disable auto reconnect to
1
iOS device *
2
Bluetooth Security *
Initial Settings
"0000"
"TM-P60II_xxxxxx"
(Where xxxxxx is the last six digits in the serial
number)
"TXAEAV5RN4"
"1" (Enable)
Low