Safety Screen/Glass Door Installation/Removal - Regency Grandview G800C Owners & Installation Manual

Safety Screen Removal
1. Slide screen
up.
2. Slide screen
right.
3. Lower
screen
down.
4. Swing
screen out-
wards while
keeping the
screen level
and remove.
Safety Screen Installation
1. To install the safety screen—Reverse steps above.
Glass Door Removal
1. To remove the glass door - place both hands on either
side of the latch. Pull forward then up to unlock, repeat
on opposite side.
Important: After releasing the latches, support the weight
of the door.
2. With both latches released, support the door with both
hands and tilt out to approximately a 60 degree angle.
3. Lift the door up and out of lower slots to remove.
Glass Door Installation
1. To install the door—Reverse steps above.
installation
Latch locations
Grandview® G800C Gas Fireplace
| 77