Decoding Operation - HIKVISION DS-6500DI–T User Manual

User Manual of DS-6500DI–T Universal Network Decoder

5.4 Decoding Operation

Steps:
In the control panel, click
1.
In this configuration interface, the left bar lists the encoding devices which has been added to the client software,
and the bottom bar with the configuration of the decoding action.
Button
Click and drag the encoding channels from the left list to the screen on the TV Wall.
2.
Select the screen and click the
3.
to start decoding.
to enter the TV Wall interface.
Figure 5.14 TV Wall Interface
Table 5.1
Description of
Description
Single-division display mode
9-division display mode
Live view
PTZ control
Stop decoding
Stop cycle decoding
button on the bottom or select Start Decoding from the right-click menu
Buttons Tool
on the bar
Button Description
4-division display mode
16-division display mode
Alarm mode
Start decoding
Start cycle decoding
49