User Manual of DS-6500DI–T Universal Network Decoder
4.2 Decoder Configuration
4.2.1 Checking Device Information
Purpose:
You can check the information of the device in the device information interface, such as the Device Type, Device
Serial No., Firmware Version, etc.
Steps:
Click Configuration > Device Information to view the device information, including the Device Type, Device
Serial No., Firmware Version, DSP Version, etc.
Note:
The device name can be edited.
4.2.2 Configuring Time Settings
You can set the time for the decoder in the Time Settings interface.
Steps:
Click Configuration > Time Settings to enter the following interface:
1.
Configure the time synchronization by NTP server or by manually.
2.
Figure 4.21 Check Device Information
Figure 4.22 Configure Time Settings
26