Table of Contents
Advertisement
User Manual of DS-6500DI–T Universal Network Decoder
4.3 Configuring Remote Playback
Purpose:
You can play back the record files stored in the remote encoding devices.
Steps:
Click Decode Operation >Remote Playback to enter the remote playback interface:
1.
Select a Decoding Channel from the drop-down list for playback.
2.
You can playback the video files of the encoding device by IP Mode or DDNS mode.
3.
Task 1: Playback Video Files of the Encoding Device by IP Mode
Check the checkbox of IP Mode.
1)
Enter the device information in the Remote Host Address, Remote Host Port, Channel Type
2)
(Normal), Remote Host Channel No., and login User Name and Password of the encoding device.
Figure 4.39 Playback Video Files of the Encoding Device by IP Mode
Task 2: Playback Video Files of the Encoding Device by DDNS Mode
Check the checkbox of DDNS Mode.
1)
2)
Enter the Domain Name of the device. You can register the alias of the device domain name in the
HiDDNS server first and then enter the alias to the domain name in the decoder; you can also enter the
domain name directly on the decoder to create a new one.
Figure 4.38 Configure Remote Playback
35
Advertisement
Table of Contents
