Table of Contents
Advertisement
User Manual of DS-6500DI–T Universal Network Decoder
Console: use the RS-232 serial port for debugging the decoder.
Transparent Channel: use the RS-232 serial port as the transparent channel.
Click Save to save the settings.
4.
Configuring RS-485 Parameters
Steps:
Click Configuration > Serial Port Settings > RS-485 Port to enter the following interface:
1.
Configure the RS-485 parameters, including the baud rate, data bit, stop bit and parity type.
2.
Click Save to save the settings.
3.
4.2.6 Configuring Alarm Input / Output Settings
Purpose:
As the Decoder is unable to obtain the alarm signal over network, it must be connected with external alarm
input/output.
Figure 4.32 Configure RS-485 Settings
31
Advertisement
Table of Contents
