Table of Contents
Advertisement
User Manual of DS-6500DI–T Universal Network Decoder
•
HiDDNS:
(1) Enter the Server Address of the HiDDNS server: www.hik-online.com.
(2) Enter the Domain Name of the device. You can register the alias of the device domain name in the
HiDDNS server first and then enter the alias to the domain name in the decoder; you can also enter
the domain name directly on the decoder to create a new one.
Note:
If a new alias of the device domain name is defined in the decoder, it will replace the old one
registered on the server.
(3) Click Save to save the settings.
After having successfully registered the device on the HiDDNS server, you can access your device via web
Note:
browser or Client Software with the Device Domain Name (Device Name).
4.2.5 Configuring RS-485/RS-232 Serial Port
Configuring RS-232 Parameters
Steps:
Click Configuration > Serial Port Settings > RS-232 Port to enter the following interface:
1.
Configure the RS-232 parameters, including the baud rate, data bit, stop bit and parity type.
2.
Select the Operating Mode of RS-232 to Console or Transparent Channel.
3.
Figure 4.30 HiDDNS Settings
Figure 4.31 Configure RS-232 Settings
30
Advertisement
Table of Contents
