Decoding Operation - HIKVISION DS-6900UDI User Manual

Step 5 Click OK to save the settings.
Step 6 Right click one of the HDMI signal sources and click Output Mode Configuration to pop up
the interface below.
Step 7 Select the output mode to HDMI or DVI.
Step 8 Check the checkbox of Batch Configuration to set the same configuration for other HDMI
outputs.
Step 9 Click OK to save the settings.
4.4

Decoding Operation

Purpose
After the video wall layout configuration, the decoding video on the video wall can be realized in
this section.
Step 1 Click Video Wall to enter the video wall interface.
HD Video and Audio Decoder User Manual
Figure 4-43
Figure 4-44 Output Mode Configuration
Batch Configuration
35
DS-6900UDI Decoder User Manual