Configuring Arming Time - HIKVISION DS-6500DI–T User Manual

User Manual of DS-6500DI–T Universal Network Decoder
Steps:
Alarm Input Settings
Click Configuration > Alarm Settings > Alarm Input to enter the alarm setting interface.
1.
Set the Alarm Sensor Type for the selected alarm input and configure the Alarm Input Handling
2.
actions. By default, the Alarm Mode is in NO (Normally Open).
Click Save to save the settings.
3.
Alarm Output Settings
Click Configuration > Alarm Settings > Alarm Output to enter the alarm setting interface.
1.
Select the alarm output, you can also customize the output delay time. Output delay time refers to the
2.
duration of the alarm after the alarm output, for example, when you set the alarm output delay time as
10 seconds, when an alarm occurs the alarming time lasts 10 seconds later than the time of the alarm
stopped.
Click Save to save your settings.
3.

4.2.7 Configuring Arming Time

Purpose:
Set the time schedule for alarm input and alarm output.
Steps:
Click Configuration > Arming Time to enter the following interface.
1.
Figure 4.33 Configure Alarm Input Settings
Figure 4.34 Configure Alarm Output Settings
32