User Manual of DS-6500DI–T Universal Network Decoder
Two NIC cards are available for the device. Select the NIC card to NIC1 or NIC2.
2.
Set the network parameters, including the Address, Subnet Mask, Gateway and DNS Server.
3.
Click Save to save the settings.
4.
4.2.4 Configuring DDNS Settings
Purpose:
If your device is set to use PPPoE as its default network connection, you may set Dynamic DNS (DDNS) to be
used for network access.
Prior registration with your DDNS Provider is required before configuring the system to use DDNS.
Steps:
Click Configuration > Network Settings > DDNS to enter the DDNS Settings interface:
1.
2.
Check the Enable DDNS checkbox to enable this feature.
3.
Select DDNS Type. Four different DDNS types are selectable: IPServer, DynDNS, PeanutHull and
HiDDNS.
•
DynDNS:
(1) Enter Server Address for DynDNS (e.g., members.dyndns.org).
(2) Enter the User Name and Password registered in the DynDNS website.
(3) In the Device Domain Name text field, enter the domain obtained from the DynDNS website.
(4) Click Save to save the settings.
Figure 4.25 Configure Basic Network Settings
Figure 4.26 Configure DDNS Settings
28