Getting Started; Attaching The Camera Strap; Inserting And Removing The Battery - Sanyo VPC E1 - Xacti Camcorder - 6.0 MP Instruction Manual

GETTING STARTED

Attaching the Camera Strap

Attach the camera strap as shown in the illustration.

Inserting and Removing the Battery

We highly recommend using specified rechargeable lithium-ion battery (3.7V) to fully demonstrate
this camera's function. Charge the battery before using the camera. Make sure that the power of the
camera is off before inserting or removing the battery.
Inserting the Battery
1. Open the battery/SD/SDHC memory card cover.
2. Insert the battery in the correct orientation shown.
Tilt the battery lock lever in the direction of the arrow and
orient the battery so that its label is facing to the rear side
of the camera, and then insert the battery.
3. Close the battery/SD/SDHC memory card cover.
Removing the Battery
Open the battery/SD/SDHC memory card cover and then release
the battery lock lever. When the battery has come out a little, slowly
pull it out the rest of the way.
EN-18