Market Forge Industries ECO-TECH PLUS ETP-10E Installation & Operation Manual page 9

INSTALLATION, OPERATION MANUAL, MODEL ETP-10E
3.0 INSTALLATION (Continued)
DRAIN CONNECTIONS
WARNING: Directly plumbing a drain line to the tempering tank may
cause personal injury or damage to the appliance. Not using the
supplied drain adapter will void your warranty.
If this equipment is being installed over an open floor drain, the
Drain Adapter is not required.
CAUTION: PVC OR CPVC are not acceptable materials for drains.
INSTALLING THE DRAIN ADAPTER
From the rear of the unit, position the drain adapter hooks through the slots in the floor of the
cabinet to and align with the holes at the rear and fasten in place with provided screws.
When making the drain connection to the 1½" NPT male thread of the drain adapter, use a pipe
wrench to firmly support the drain adapter nipple to prevent damage to the assembly.
Part No. 10309R0 9 2019-05-14