Market Forge Industries ECO-TECH PLUS ETP-10E Installation & Operation Manual page 8

INSTALLATION, OPERATION MANUAL, MODEL ETP-10E
3.0 INSTALLATION (Continued)
PLUMBING CONNECTIONS
NOTICE: Equipment not installed in accordance with these
guidelines may void the warranty.
CAUTION: An obstructed drain can cause personal injury or
property damage.
WARNING: Plumbing connections must comply with applicable
sanitary, safety, and plumbing codes.
Connect water supply line at the rear of the steamer. The water supply line pressure should be
25 - 50 PSI (1.8 - 3.5 kg/cm²).
Install line strainer (not provided). A manual shutoff valve for supply line must be provided
convenient to the steamer.
Part No. 10309R0 8 2019-05-14