Getting Started - Barco UDX Series User Manual

Getting Started

How to control the projector ?
The projector can be controlled by the local keypad, by the remote control unit or by browser application.
Location of the local keypad ?
The local keypad is located on the input side of the projector.
Remote control functions.
This remote control includes a battery powered infrared (IR) transmitter that allows the user to control the
projector remotely. This remote control is used for source selection, control, adaptation and set up.
Other functions of the remote control are :
• switching between stand by and operational mode.
• switching to "pause" (blanked picture, full power for immediate restarting)
• direct access to all connected sources.
Overview
•
Power on projector
•
Switching to standby
•
Power off projector
•
Using the RCU
•
Projector Address
•
Quick setup via Direct access
•
Software update
4
R5906112 /09 UDX series 61