8.6 Orientation
What can be done?
The way of physical installation of the projector can be defined to the projector.
The following installation are possible:
•
front/table
•
front/ceiling
•
rear/table
•
rear/ceiling
How to set the correct orientation
1.
In the main menu, select Installation → Orientation.
Image 8-12: Installation menu, Orientation
The Orientation menu is displayed.
Image 8-13: Orientation menu
2.
Use the ▲ or ▼ key to select the desired mounting position and press OK button to activate.
Use the ▲ or ▼ key to select the desired projection position and press OK button to activate.
GUI – Installation
R5906112 /09
UDX series
109