Barco UDX Series User Manual page 42

Input & Communication
While there are several minor and barely noticeable differences between the two boards, there is one real
visual aid to tell the two variants apart. There are visual markings added on the Mark II Input board, marking
which connector supports 12G and which only supports 3G.
SDI IN
SEL
SYNC
1
A
Image 3-5: Mark 1 Quad Combo input board, without markings
above the SDI inputs
SDI IN
3G/12G SEL
SYNC
2
A
Image 3-6: Mark 2 Quad Combo input board, with 3G/12G markings
above the SDI inputs/outputs.
Overview Mark 2 Quad Combo Input board
SDI IN
3G/12G SEL 3G
SYNC
A B
1 2
Image 3-7
1 Quad SDI channel A: 3G/12G input
2 Quad SDI channel B: 3G input
3 Quad SDI channel C: 3G SDI input + 3G/12G
output
4 Quad SDI channel D: 3G SDI input / output
The yellow LED lights up when valid input sync is detected.
The green LED lights up when the input is selected.
The green LED lights blink when the input/output is selected and configured as output.
Input specifications – SDI Inputs
For readability, the video timings listed are summarized. For the full list of video timings, refer to the
appendices.
HD-SDI follows the SMPTE 292M standard
3G SDI follows the SMPTE 425M standard Level A
12G-SDI follows the SMPTE ST-2082-1 and ST-2082-10 standards.
Color space
Color depth
Chroma sampling
Audio support
For future release
42 R5906112 /09 UDX series
SDI IN/OUT
SEL SEL SEL
SYNC SYNC SYNC
B C D
SDI IN/OUT
3G SEL 3G SEL 3G SEL
SYNC SYNC SYNC
B C D
SDI IN/OUT
3G SEL 3G SEL
SEL
SYNC SYNC SYNC
C D
3 4
YCbCr
10 bpc
4:2:2
not supported
• 3D support
• Interlaced support
SEL SEL
DP SYNC HDMI SYNC HDBT 1
5 6 7
5 DisplayPort Input
6 HDMI input
7 HDBaseT input 1
8 HDBaseT input 2
SEL
SEL
SYNC SYNC
HDBT 2
8