Removal Of An Input Board - Barco UDX Series User Manual
Hide thumbs
Also See for UDX Series:
- User manual (148 pages) ,
- Installation manual (100 pages) ,
- Quick reference manual (6 pages)
Table of Contents
Advertisement
3.9 Removal of an input board
WARNING: The procedures below may only be performed by Barco trained and qualified
technicians.
CAUTION: Always wear a wrist band which is connected to the ground while handling the
electrostatic discharge (ESD) sensitive parts.
The procedure below is applicable to all the input modules of the Input & Communication Unit of the
projector.
How to remove
1.
Switch off the projector and unplug the power cord at the projector back side.
2.
Release the 3 captive screws of the input module (4).
Image 3-15
3.
Pull out the input module of the Input & Communication using the handles.
Input & Communication
R5906112 /09
UDX series
57
Advertisement
Table of Contents
