Barco UDX Series User Manual page 160

GUI – System Settings
Note: Digits can be entered with the digit keys on the remote control or the local keypad. When a digit
is entered in that way, the next character will be selected automatically.
5. Repeat steps 4 and 5 for the Subnet mask and Default Gateway.
6. Select APPLY and click OK to confirm all changes.
7. Select the Select SSID dropdown menu and select the desired wireless network.
8. Press Connect to connect to the selected network.
9. If required by the chosen wireless network, fill in the username and password and confirm.
An automatic IP address is assigned.
When connected to this network, it is indicated in the upper right corner of the menu with the term "connected".
160 R5906112 /09 UDX series