Functions Of The "Button Pressed Indicator - Barco UDX Series User Manual

2.5 Functions of the "button pressed indicator"

Functions button pressed indicator
• Rapidly flashes when commands are sent, this is the normal "button pressed" indication.
• 1 Short flash when remote control is switched ON by means of the on/off button.
• Continuously lit (up to 5 seconds) when address digits are expected after pressing the ADDR button.
• Slowly flashes (2 times a second) when the battery level is becoming low; typically when more than 85% of
the useful life is past.
Pulse Remote Control Unit
R5906112 /09 UDX series 29