Displaying A Single Source - Barco UDX Series User Manual
Hide thumbs
Also See for UDX Series:
- User manual (148 pages) ,
- Installation manual (100 pages) ,
- Quick reference manual (6 pages)
Table of Contents
Advertisement
GUI – Source
6.1 Displaying a single source
About selecting a source
Before a source can be projected, the source signal must be connected to the source input(s) of the device
and a valid synchronization signal must be available along with the source signal on at least one of the input
connectors.
How to select?
1.
Press Menu to activate the menus and select Source.
Image 6-1: Select Source
2.
Press OK.
The Select Source menu is displayed with the actual available sources filled out.
Image 6-2: Input selection
3.
Select the desired input.
82
R5906112 /09
UDX series
Advertisement
Table of Contents
