Connection Possibilities - Barco UDX Series User Manual

8.12.3 Connection possibilities

At this moment, the only inputs supporting 3D on the Pulse input boards are the DisplayPort inputs
and HDMI input. More inputs may support 3D in a future release.
Connecting with the quad combo input card
There is only one way of projecting Active stereoscopic 3D with the Combo input card, using the following
setup:
• Source: Active Stereo (sequential L/R)
• Layout mode: Standard layout (1x1 layout)
• Video Timing: 2560 x 1600 (WQXGA) @120 Hz
• Color depth: 30 bpp
• Connector: DisplayPort 1.2 or HDMI
Connecting with the quad DP 1.2 Input card
You can use one of the following methods. The resulting image will always be an Active Stereo image.
Layout mode
Source
Active Stereo Standard layout (1x1
(sequential L/R) layout)
Active Stereo 4 Column mode (4x1
(sequential L/R) layout)
Active Stereo 4 Quadrant mode
(sequential L/R) (2x2 layout)
Passive Stereo Standard layout (1x1
(separate L/R) layout)
Passive Stereo (dual 2 Column mode (2x1
pipe L/R) layout)
Fixed
Video Timing /
configuration?
cable
2560 x 1600 @120
Hz
960 x 2160 @120 Hz
1920 x 1080 @120
Hz
3840 x 2160 @60 Hz • Cable 1: left eye
• Cable 2: right eye
1920 x 2160 @60 Hz • Cable 1: left eye,
left column
• Cable 2: left eye,
right column
• Cable 3: right
eye, left column
• Cable 4: right
eye, right column
GUI – Installation
Color depth
30 bpp
30 bpp
30 bpp
30 bpp
30 bpp
R5906112 /09 UDX series 143