Remote Control, On/Off Button - Barco UDX Series User Manual

Pulse Remote Control Unit

2.3 Remote control, on/off button

Purpose of the remote control on/off button
The Pulse remote control unit has at the front side an on/off switch (reference 1 Image 2-5). Switching off the
remote control prevents that unwanted commands are send due to an accidental key press. Furthermore,
switching the RCU off will extend the battery life time of the remote control.
To activate the remote control press the on/off button.
To deactivate the remote control press the on/off button again.
Default when (re)placing batteries, is "ON".
1
Image 2-5
R5906112 /09 UDX series 27