Table of Contents
Advertisement
BECKHOFF
2.2
Use as directed
l
l
l
l
l
l
2.3
Prohibited use
l
l
Servomotors AM3000
The AM3000 series of synchronous servomotors is designed especially for drives for indu-
strial robots, machine tools, textile and packing machinery and similar with high require-
ments for dynamics.
The user is only permitted to operate the motors under the ambient conditions which are de-
fined in this documentation.
The AM3000 series of motors is exclusively intended to be driven by servo amplifiers from
the AX2000 series under speed and / or torque control.
The motors are installed as components in electrical apparatus or machines and can only be
commissioned and put into operation as integral components of such apparatus or machi-
nes.
The thermal contact which is integrated in the motor windings must be observed and evalua-
ted.
The conformity of the servo-system to the standards mentioned in the manufacturers
declaration on page 5 is only guaranteed when the components (servo amplifier, motor, ca-
bles etc.) that are used have been supplied by us.
The use of the motors in the following environments is prohibited:
- potentially explosive areas
- environments with corrosive and/or electrically conductive acids, alkaline solutions,
oils, vapours, dusts
- directly on supply networks
Commissioning the motor is prohibited if the machine in which it was installed
- does not meet the requirements of the EC Machinery Directive
- does not comply with the EMC Directive
- does not comply with the Low Voltage Directive
06/2008
Safety
7
Advertisement
Table of Contents
