Table of Contents
Advertisement
Overview
General Precautions
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Regenerative Brake
Operation
The 1336 REGEN Line Regeneration Package represents an amp
rated package that can remove energy from the DC bus of a 1336
PLUS, PLUS
, FORCE or IMPACT AC drive and send it back to
II
the utility. When properly sized with one or more standard 1336
PLUS, PLUS
, FORCE or IMPACT AC drives, Regenerative
II
Brake Operation provides an energy efficient alternative solution
to dynamic braking.
ATTENTION: Only personnel familiar with the 1336
!
REGEN Line Regeneration Package and associated
equipment should plan or implement the installation,
start-up and subsequent maintenance of the system.
Failure to comply may result in personal injury and/or
equipment damage.
ATTENTION: This product and its associated
!
equipment contains ESD (Electrostatic Discharge)
sensitive parts and assemblies. Static control
precautions are required when installing, testing,
servicing or repairing this assembly. Component
damage may result if ESD control procedures are not
followed. If you are not familiar with static control
procedures, reference publication 8000-4.5.2
"Guarding Against Electrostatic Damage" or any other
applicable ESD protection handbook.
ATTENTION: The 1336 REGEN Line Regeneration
!
Package is shipped from the factory with Parameter 1
set to the Regenerative Brake Mode of operation.
Ensure that Parameter 1
factory setting of Regenerative Brake Mode as
described in the Programming section of this chapter.
Incorrectly applied or installed equipment can result in
component damage or a reduction in product life.
Wiring or application errors, such as incorrect or
inadequate AC supply or excessive ambient
temperatures may result in malfunction of the 1336
REGEN Line Regeneration Package.
Chapter
is set to its
[Operational Mode]
3
Advertisement
Table of Contents
