Table of Contents
Advertisement
Fixed Bus Voltage Operation, 2-27
Grounding, 2-6, 3-11
Heatsink Through-the-Back Mounting
HIM Description, 2-23
HIM Enter Button, 2-23, 3-28, 3-29
HIM ESCape Button, 2-23, 3-28
HIM Increment/Decrement Button, 2-23,
3-28
HIM Operation, 2-23, 3-28
HIM Removal, 2-23, 3-28
HIM SELect Button, 2-23, 3-28
HIM Startup Programming, 2-24
Human Interface Module, 2-23
input amp rating (Regen DC Bus Supply
Mode), 2-3
input power conditioning, 2-3, 3-8
isolation transformers, 2-5, 3-10
LED Status Indication
line regeneration, 1-1
maximum deceleration times for
regenerative brake operation, 3-8
Min/Max Value Definition, 2-28, 3-33
motoring power, 1-2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Sys. Mode Change - Fault Code No.
50, 4-6
Unknown Error - Fault Code No. 41,
4-5
G
H
1336 REGEN B Frame, A-10
1336 REGEN C Frame, A-11
1336 REGEN D Frame, A-12
I
L
Com - DS4, 4-1
Enable - DS2, 4-1
Fault - DS1, 4-1
Status - DS3, 4-1
M
Index
N
nameplate location (1321 10% Line
Reactor), 1-9
nameplate location (1321 3% Line
Reactor), 1-8
nameplate location (B and C Frame
Converter), 1-5
nameplate location (B, C and D Frame
Precharge Units), 1-7
nameplate location (D Frame Converter),
1-6
O
operating mode choice, 1-2
Operational Mode Factory Setting (Regen
DC Bus Supply Mode), 2-25
P
Parameter No. Definition, 2-28, 3-33
Parameter Type Definition, 2-28, 3-33
Parameters
AC Line Current - Par. No. 3, 2-29,
3-34
AC Line Overvoltage Trip Level 1
(Not Enabled) - Par. No. 18, 2-32,
3-37
AC Line Overvoltage Trip Level 2
(Enabled) - Par. No. 19, 2-32, 3-37
AC Line Undervoltage Trip Level 1
(Not Enabled) - Par. No. 20, 2-33,
3-38
AC Line Undervoltage Trip Level 2
(Enabled) - Par. No. 21, 2-33, 3-38
Actual Bus Voltage - Par. No. 5, 2-30,
3-35
Bus Overvoltage Trip Level - Par. No.
16, 2-32, 3-37
Conduction Angle Constant - Par. No.
9 - Regen Brake Operation Only, 3-35
Current Command Being Issued -
Par. No. 25, 2-34, 3-39
DC Bus Undervoltage Trip Level -
Par. No. 17, 2-32, 3-37
Fault Select 1 - Par. No. 27, 2-35,
3-40
HIM Default Display Parameter - Par.
No. 28, 2-35, 3-40
I–5
Advertisement
Table of Contents
