Allen-Bradley 1336 REGEN Series User Manual page 50

Programming
L U V T r i p 1
8 5 % 2 0
Parameter No.
Display Units
Read/Write
Parameter Type
85% AC
Factory Default
BASE
75/90% AC
Min/Max Value
BASE
100 = 4096
Drive Units
L U V T r i p 2
6 0 % 2 1
Parameter No.
Display Units
Read/Write
Parameter Type
60% AC
Factory Default
BASE
50/70% AC
Min/Max Value
BASE
100 = 4096
Drive Units
P L L R e g E r r T r i p
0 . 1 0 2 2
Parameter No.
Number
Display Units
Read/Write
Parameter Type
Factory Default
0.0/0.3
Min/Max Value
1.0 = 4096
Drive Units
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
AC Line Undervoltage Trip Level 1 (Not Enabled)
This parameter sets a software under voltage trip point that is active when the 1336 REGEN
Converter is not enabled. The 1336 REGEN Converter is factory set to prevent it from being
enabled when the input AC line voltage is less than 85% of the AC
20
For 380VAC input Line Regeneration Packages, AC
%
For 460VAC input Line Regeneration Packages, AC
Important: The 1336 REGEN Converter cannot be enabled for the [LUV Trip 1] to be
changed.
AC Line Undervoltage Trip Level 2 (Enabled)
This parameter sets a second software under voltage trip point that is active when the 1336
REGEN Converter is enabled. The 1336 REGEN Converter is factory set to trip if the input AC
line voltage is less than 60% of the AC
21
For 380VAC input Line Regeneration Packages, AC
%
For 460VAC input Line Regeneration Packages, AC
Important: The 1336 REGEN Converter cannot be enabled for the [LUV Trip 2] to be
changed.
Phase Locked Loop Error Trip Point
The phase locked loop of the 1336 REGEN Line Regeneration Package synchronizes 1336
REGEN operation with the incoming power from the utility. This parameter allows the software
trip point of [PLLReg Err Trip] to be adjusted to help avoid nuisance trips due to utility
22
distortion.
Important: The 1336 REGEN Converter cannot be enabled for a [PLLReg Err Trip] to be
0.1
changed.
Regenerative DC Bus Supply Operation
BASE
BASE
volts.
BASE
BASE
BASE
2–33
volts.
BASE
volts = 380V.
volts = 460V.
volts = 380V.
volts = 460V.